First match the order form to the basket. Making sure the design is correct
Flip basket over and feel along all edges for nails sticking out. If you feel something, pound it in with a hammer.
Flip basket back over and make sure every rail has a nail by pushing on it. If it doesn't move, there is a nail holding it in and you are good to proceed to next step.
If it moves it needs a nail. Set aside to give back to assembly to add a nail or you can add the nail yourself. To mark which rail needs a nail, use a clip and place on that rail.
Make sure any loose fiber/hairy bits are cleared away from each rail opening.
Check the inside of the basket to make sure mesh is in the groove and no pokey parts are sticking out.
Quickly sand each handle top and bottom to brush off any rough bits.
Check to make sure each basket has 2 screws on each side.
Pull bubble to end of table and cut bubble at tape mark. Place basket in center of bubble.
Pick up bubble and basket all at once and place into box. Tucking extra bubble around basket.
Seal box tape to tape. Attach order from to front with tape.
Box Sizes:
1 basket- 20x14x6
2 baskets- 20x14x10
3 baskets- 20x16x14